Supplies for the GERSTEL TDS
Consumables and accessories
Content
- Desorption tubes
- Desorption tubes, conditioned
- Spare parts for Desorption tubes
- Spare parts for GERSTEL Pyrolysis Module PM 1
- Spare parts for TDS A tray
- Spare parts for TDS A2 tray
- Transfer lines
- Transfer line kit
- Direct interface
- GRAPHPACK 2M adapter
Desorption tubes, not conditioned
| Description | units | Part No. |
| packed with Tenax TA 60/80, OD 6.00 mm | 5 | 012260-005-00 |
| packed with Tenax GR, OD 6.00 mm | 5 | 012275-005-00 |
| packed with Chromosorb 106, OD 6,00 mm | 5 | 012276-005-00 |
| packed with Carbosieve, OD 6.00 mm | 5 | 012277-005-00 |
| packed with Carbotrap 300, multibed, OD 6.00 mm | 5 | 012346-005-00 |
|
Desorption tube kit, included tubes packed with: |
5 | 012347-005-00 |
|
packed with Teax/Carboxene, OD 6.00 mm, |
1 | 009118-000-00 |
|
empty, with marking |
1 |
010649-000-00 010649-010-00 |
|
empty, with marking and glass frit |
1 10 |
010650-000-00 010650-010-00 |
|
empty, OD 6.00 mm ID 4.5 mm |
10 | 012518-010-00 |
|
empty, stainless steel OD 6.00 mm |
1 | 013790-000-00 |
Desorption tubes, conditioned
| Description | units | Part No. |
| packed with Carbotrap 202, OD 6.00 mm, in storage container, glass tube |
1 | 012458-000-00 |
| packed with Tenax 60/80, OD 6.00 mm in storage container, glass tube |
1 | 009947-000-00 |
| packed with Tenax 60/80, OD 6.00 mm in storage container, stainless steel |
1 | 010040-000-00 |
| packed with Tenax GR, OD 6.00 mm in storage container, glass tube |
1 | 009948-000-00 |
| packed with Tenax GR, OD 6.00 mm in storage container, stainless steel |
1 | 010041-000-00 |
| packed with Tenax GR 180 mg-60/80, OD 6.00 mm, in storage container, glass tube |
1 | 012459-000-00 |
| packed with Carbosieve S III, OD 6.00 mm in storage container, glass tube |
1 | 009949-000-00 |
| packed with Carbosieve, S III OD 6.00 mm in storage container, stainless steel |
1 | 010042-000-00 |
| packed with Carbotrap 300, OD 6.00 mm in storage container, glass tube |
1 | 008357-000-00 |
| packed with Carbotrap 300, OD 6.00 mm in storage container, stainless steel |
1 | 010044-000-00 |
| packed with Carbotrap 349, OD 6.00 mm in storage container, glass tube |
1 | 009117-000-00 |
| packed with Carbotrap 217, OD 6.00 mm in storage container, glass tube |
1 | 013115-000-00 |
| packed with Carbotrap C, OD 6.00 mm in storage container, stainless steel |
1 | 013791-000-00 |
| packed with Tenax TA und Carbosieve SIII, OD 6.00 mm; in storage container, stainless steel |
5 | 014752-005-00 |
| packed with Carbotrap B undCarbotrap C, OD 6.00 mm, in storage container, stainless steel | 5 | 015244-005-00 |
Sorption tubes
| Description | units | Part No. |
| Glass tube packed with PDMS, OD 6.00 mm, for air sampling |
1 | 009171-000-00 |
Spare parts for Desorption tubes
|
Description (not deactivated) |
units | Part No. |
| Storage container for OD 6.00 mm | 1 | 008351-000-00 |
| End cap set for OD 6.00 mm; stainless steel, with PTFE seals |
1 | 008235-060-00 |
| End caps for OD 6.00 mm, stainless steel, with PTFE seals |
10 | 012659-010-00 |
| Storage end caps 1/4", 3,5" long, brass | 20 | 011754-020-20 |
| TDS empty tubes OD 1/4"x3,5" long, stainless steel | 1 | 011619-000-00 |
| Diffusion caps for TDS tubes OD 1/4" | 10 | 011620-010-00 |
| Screens for ID 4.00 mm | 10 | 008980-010-00 |
| Screens for TDS Desorption tubes in combination with GERSTEL Twister |
10 | 015686-010-00 |
| End cap set for TDS tube | 1 | 009209-000-00 |
| Tweezer for handling TDS tubes | 1 | 009970-050-00 |
Spare parts for Pyrolysis Module PM 1
| Description | units | Part No. |
| Desorption tube, OD 6.0 mm-ID 5.0 mm empty |
10 100 |
009553-010-00 009553-100-00 |
| Sample tubes | 10 50 |
009250-010-00 009250-050-00 |
| Sample tube Quartz glass for TDS 2-PYRO-XL OD 2.5 mm-ID 1.9mm |
20 100 |
015137-020-00 015137-100-00 |
| Desorption tube, OD 6.0 mm-ID 5.0 mm empty, |
10 100 |
009553-010-00 009553-100-00 |
Spare parts for TDS A tray
| Description | units | Part No. |
| O-rings | 10 | 008174-010-00 |
Spare parts for TDS A2 tray
| Description | units | Part No. |
| Sealing plugs | 10 | 014173-010-00 |
| O-rings | 10 | 015471-010-00 |
| Set sealing plug with locking pin | 10 | 014822-010-00 |
| Sealing adapter with viton flat seal | 10 | 014879-010-00 |
| Fastening angle with Viton flat sea | 1 | 014898-000-00 |
| Sealing adapter with Viton O-Ring | 10 | 015470-010-00 |
| Fastening angle with Viton O-ring | 1 | 015469-000-00 |
|
Seal set consisting of: |
015285-000-00 | |
|
Seal set consisting of: |
015286-000-00 |
Transfer line
| Description | units | Part No. |
| Fused Silica, OD 0.70 - ID 0.53 mm | 5 m | 008644-005-00 |
| Prosteel, OD 0.70 - ID 0.53 mm | 5 m | 008687-005-00 |
| Silcosteel, OD 0.74 - ID 0.53mm | 5 m | 010963-005-00 |
| Sulfinert, OD 0.74 - ID 0.53 mm | 5 m | 012185-005-00 |
Transfer line kit
| Description | units | Part No. |
| Fused Silica, OD 0.45 - ID 0.32 mm GRAPHPACK 2M ferrule |
1m 10 |
011003-000-00 |
| Prosteel, OD 0.67 - ID 0.53 mm GRAPHPACK 2M ferrule |
1m 10 |
011004-000-00 |
| Silcosteel, OD 0.72 - ID 0.53 mm GRAPHPACK 2M ferrule |
1m 10 |
011005-000-00 |
| Sulfinert, OD 0.74 - ID 0.53 mm GRAPHPACK 2M ferrule |
1m 10 |
012186-000-00 |
Direct interface
| Description | units | Part No. |
| TDS 2/3 with CIS 3, OD 0.70 mm | 1 | 007823-007-00 |
| TDS 2/3 with CIS 4, OD 0.70 mm | 1 | 008311-007-00 |
| TDS 2/3 - TDS G with CIS 3s; OD 0.70 | 1 | 011025-007-00 |
| TDS 2/3 with CIS 3s Tremetics, OD 0.70 mm | 1 | 011628-007-00 |
| TDS 2/3 with CIS 3, OD 0.45 mm | 1 | 007823-045-00 |
| TDS 2/3 with CIS 4, OD 0.45 mm | 1 | 008311-045-00 |
| TDS 2/3 - TDS G with CIS 3s; OD 0.45 | 1 | 011025-045-00 |
| TDS 2/3 with CIS 3s Tremetics, OD 0.45 mm | 1 | 011628-045-00 |
GRAPHPACK 2M adapter
| Description | units | Part No. |
| for OD 0.45 mm | 1 | 007820-045-00 |
| for OD 0.7 mm | 1 | 007820-007-00 |
| Silver seal | 5 | 007821-005-00 |